Page 56 - Manual Oficina Polaris RS1 2018 e 2019

MAINTENANCE

CAM CHAIN TENSIONER INSPECTION TORQUE

1. Locate the cam chain tensioner on the MAG side of Tensioner Mounting Bolts:
the engine near the starter. 7 ft-lb (10 Nm)
2. Remove the plunger bolt q and the spring.
7. Install the plunger bolt. Torque fastener to
specification.
TORQUE
Plunger Bolt:
15 ft-lb (20 Nm)

3. Remove the two tensioner mounting bolts w.
4. Push on the tensioner lock e and manually move the
plunger in and out. It should move freely. If it does not
move freely, replace the tensioner assembly.

5. Retract the plunger all the way in and install into the
cylinder.

6. Install the two mounting bolts. Torque fasteners to
specification.

2.34 9928689 - 2018 RZR RS1 Service Manual
© Copyright Polaris Industries Inc.