Page 54 - Manual Oficina Polaris RS1 2018 e 2019
P. 54

MAINTENANCE

                VALVE CLEARANCE INSPECTION                           5. Remove nine screws t retaining the outer clutch
                                                                        cover.
                                      NOTE
                  Valve clearance inspection should be performed on a
                          cold engine, at room temperature.

                1. Remove center hood q and storage box w.













                                                                     6. Maneuver the outer clutch cover to allow access to
                                                                        the drive clutch, in order to rotate the engine.





                2. Disconnect the negative (-) battery cable.
                3. Remove left rear fender (see Rear Fender, page
                   10.12 in the Body / Frame chapter).
                4. Loosen two worm clamps e and remove clutch
                   intake duct r.









                                                                                           NOTE
                                                                        Removal of left rear wheel or left rear shock is NOT
                                                                              necessary to perform this procedure.

                                                                     7. Remove screw y and remove the engine access
                                                                        panel u.



























                2.32                                                                      9928689 - 2018 RZR RS1 Service Manual
                                                                                                © Copyright Polaris Industries Inc.
   49   50   51   52   53   54   55   56   57   58   59