Page 270 - Manual Oficina Polaris RZR 570 13-18

PVT SYSTEM

SITUATION PROBABLE CAUSE REMEDY
Belt slippage due to water, oil, grease, etc., Inspect system. Clean , repair or replace as
rubbing on cover. necessary.
Seal PVTsystem ducts.
Clutches or weight being applied to cover Remove weight. Inform operator
while in operation.
High vs. low range. Instruct operator on guidelines for operation in
proper driving range for different terrain as
outlined in Owner’s Safety and Maintenance
Manual.
Cover seals or ducts leaking. Find leak and repair as necessary.

Water ingestion Operator error. Instruct operator on guidelines for operation in
wet terrain as outlined in Owner’s Safety and
Maintenance Manual.
Belt worn out. Replace belt.
Belt slippage Water ingestion. Inspect and seal PVTsystem.
Belt contaminated with oil or grease. Inspect and clean.

Belt worn or separated, thin spots, loose Replace belt.
belt.
PVT noise
Broken or worn clutch components, cover Inspect and repair as necessary.
hitting clutches.
Thin spots on belt, worn belt . Replace belt. Refer to belt burnt troubleshooting
Engagement and instruct operator.
erratic or stabby
Drive clutch bushings stick. Inspect and repair clutches.

5.38 9926813 R06 - 2013-2016 RZR 570 Service Manual
© Copyright Polaris Industries Inc.