Page 266 - Manual Oficina Polaris RZR 570 13-18

PVT SYSTEM

3. Line up the X on the moveable sheave with the X on 6. Install the spring pins t to secure the roller pins.
the stationary sheave. Put the sheaves together. Install until flush with sheave surface.

4. Install the rollers e onto the roller pins r and install 7. Install the spring over the shaft.
on the clutch. 8. Install the clutch rollers y onto each side of the
spider. Install the washers u and E-clips i to secure
the rollers. The rollers should spin freely.

5. Install the roller pin into the sheave assembly on both
sides. The flat side of the roller pin faces towards the
sheaves. 9. Install the spider dampener o inside the spider and
install the inside spider plate a.

5.34 9926813 R06 - 2013-2016 RZR 570 Service Manual
© Copyright Polaris Industries Inc.