Page 283 - Manual Oficina Polaris RZR 570 13-18
P. 283
TRANSMISSION
25. Install new spring ring on rear drive shafts. Apply an 27. Install new brake caliper mounting bolts and torque
anti-seize compound to the splines. to specification.
26. Install the rear drive shaft splines into transmission
splines. Install the fasteners that attach the rear
bearing carrier to the upper and lower A-arms. TORQUE
Torque new nuts to specification.
Rear Caliper Mounting Bolts:
44 ft-lbs (60 Nm)
6
CAUTION
New bolts have a pre-applied locking agent which is
destroyed upon removal. Always use new brake caliper
mounting bolts upon assembly.
28. Install rear wheels and wheel nuts. Torque to
specification.
TORQUE
Wheel Nuts:
RZR 570 Steel Rims: 36 ft-lbs (49 Nm)
RZR 570 EPS Alum. Rims: 120 ft-lb (163 Nm)
TORQUE RZR S 570 Alum. Rims: 30 ft-lbs (41 Nm) + 90°
Upper and Lower Rear Bearing Carrier Nuts: 29. Properly lower the vehicle.
40 ft-lb (54 Nm)
30. Verify all wire and hose routings are correct. Connect
the (-) negative battery cable.
31. Install the engine service panel and seats.
32. If transmission lubricant was drained, fill the
transmission with the specified amount of Polaris
AGL (see Chapter 2 – Transmission Lubrication,
page 2.46).
FLUID CAPACITY
Recommended Transmission Lubricant:
AGL (2878068) (Quart)
Capacity: 44 oz. (1300 ml)
9926813 R06 - 2013-2016 RZR 570 Service Manual 6.13
© Copyright Polaris Industries Inc.
