Page 287 - Manual Oficina Polaris RZR 570 13-18

TRANSMISSION

21. Remove the retaining ring, washer, needle bearing, CAUTION
and sprocket from the reverse shaft (see Figure 8-1).
The pinion shaft must be removed prior to removing the
22. Tilt the two shafts towards each other and remove snorkel shaft assembly. Failure to remove pinion shaft,
the silent chain from the two shafts. will result in damage to the snorkel shaft.
23. If necessary, disassemble the other end of the
reverse shaft. Remove the bearing, engagement 25. Extract the seal from the snorkel shaft to access the
dog, retaining ring, washer, gear and needle bearing snorkel tube for removal.
from the reverse shaft (see Figure 8-2).

26. Using the Snorkel Tool (PA-50231), fully loosen the 6
snorkel tube.

24. To disassemble the shift shaft rail remove the snap
ring (X) from the end of the shift rail on either side.

CAUTION
Use caution when disassembling the shift rail. The
compressed springs on the shift rail may pop off
causing eye or face injury.

Snorkel Shaft Removal / Disassembly

9926813 R06 - 2013-2016 RZR 570 Service Manual 6.17
© Copyright Polaris Industries Inc.