Page 297 - Manual Oficina Polaris RZR 570 13-18
P. 297
TRANSMISSION
30. Install the spacer onto the shift drum shaft. 33. Install a new O-ring on each shift shaft. Apply a small
amount of white lithium grease on the O-rings, shift
shafts and component contact surfaces prior to
installing the sector cover.
31. Install the detent star onto the shift drum shaft. Be
sure to install the detent star with the raised edge
facing outward and skip-tooth aligned.
34. Clean the transmission and gear sector cover mating
32. Install the detent pawl onto the shift shaft and surfaces thoroughly.
carefully install the compression spring.
35. Apply Crankcase Sealant (3-Bond) (PN 2871557)
onto the cover and transmission case mating 6
surface.
36. Install the sector cover and align the transmission
case dowel with the alignment hole. Install and
torque the bolts to specification.
TORQUE
Sector Cover Bolts:
11 ft-lbs (15 Nm)
37. Install the transmission drain plug and torque to
specification.
TORQUE
Fill / Drain Plug:
12 ft-lbs (16 Nm)
38. Install the bell Crank onto the shift shaft. Note the
key splined on the bell Crank and shift shaft. Install
the nut and torque to specification.
TORQUE
Bell Crank Nut:
15 ft-lbs (20 Nm)
39. Refer to Chapter 8 – Transmission Installation, page
6.10to complete the repair.
9926813 R06 - 2013-2016 RZR 570 Service Manual 6.27
© Copyright Polaris Industries Inc.
