Page 280 - Manual_Polaris_RZR_ProXP-20-21

EFI / FUEL SYSTEM

2. Retain vent line to the purge line with a zip tie e. 6. Route vent line back along the left shock support tube
and attach to the fitting in the frame o.

3. Route vent line into the carbon canister r.

VENT LINE TERMINATION FITTING
This fitting should be inspected and tested using a Mity
Vac™ to ensure proper venting. Connect the Mity Vac to
the fitting and give it 5 pumps. The gauge should return
to 0 immediately or there is an obstruction.

4. Route vent line t from the carbon canister to the
canister filter y.

NOTICE
If the vent line fitting is removed from the frame, it must
be replaced. The ears on the clip (arrows) will not hold
properly once it is removed.

5. Route vent line u up from the canister filter and
attach to two retaining clips i.

5.20 9930583 R01 - 2020-2021 RZR PRO XP / XP 4 Service Manual
© Copyright Polaris Industries Inc.