Page 379 - Manual_Polaris_RZR_ProXP-20-21

FINAL DRIVE

PROP SHAFT
PROP SHAFT REMOVAL / 4. Remove one fastener from under the driver’s seat e.
INSTALLATION
REMOVAL
1. If removing the front prop shaft, Locate the prop
shaft roll pin q and use the Roll Pin Removal Tool to
remove the roll pin. Discard roll pin. Push the front
prop shaft rearward to remove it from the front
gearcase input shaft.

5. Remove four fasteners r from the prop shaft
mounting plate t.

Roll Pin Removal Tool:
2872608

NOTICE
Right front wheel can be removed to gain better access
to the prop shaft roll pin.
8
2. Remove the fasteners w retaining the front and rear
skid plates. 6. Disconnect front prop shaft from the rear prop shaft.
Remove front prop shaft out through the bottom of the
vehicle.

3. Remove driver’s seat.

9930583 R01 - 2020-2021 RZR PRO XP / XP 4 Service Manual 8.21
© Copyright Polaris Industries Inc.