Page 383 - Manual_Polaris_RZR_ProXP-20-21

FINAL DRIVE

4. Remove four fasteners r from each prop shaft 7. Remove two fasteners y retaining each prop shaft
mounting plate t. bearing to its mounting plate. Take to avoid incorrect
installation, mark each plate as “front plate” or “rear
plate”.

5. Disconnect prop shafts from each other. Remove
middle prop shaft, and front prop shaft through the
bottom of the vehicle. 8. Remove the two fasteners retaining roll hoop to the
frame. Remove roll hoop.
6. Mark prop shafts for reassembly.

8

9. Remove rear prop shaft through the bottom of the
NOTICE vehicle.
The prop shafts have a master spline and will only go
on one way.

9930583 R01 - 2020-2021 RZR PRO XP / XP 4 Service Manual 8.25
© Copyright Polaris Industries Inc.