Page 384 - Manual_Polaris_RZR_ProXP-20-21

FINAL DRIVE

INSTALLATION TORQUE

1. Reverse removal procedure for prop shaft installation. Front Caliper Mounting Bolts:
33 ft-lbs (45 Nm)
TORQUE
Support Bearing Fasteners:
TORQUE
30 ft-lbs (40 Nm)
Front Bumper Mounting Fasteners:
30 ft-lbs (40 Nm)
TORQUE
Roll Hoop Fasteners:
TORQUE
13 ft-lbs (18 Nm)
Front Bumper Cover Mounting Fasteners:
7 ft-lbs (10 Nm)
TORQUE
Prop Shaft to Transmission Coupler Fasteners:
TORQUE
11 ft-lbs (15 Nm)
Wheel Nuts:
120 ft-lbs (163 Nm)
TORQUE
Prop Shaft Mounting Plate Fasteners:
15 ft-lbs (20 Nm)

TORQUE
Body Fasteners:
7 ft-lbs (10 Nm)

TORQUE
Control Arm Fasteners:
74 ft-lbs (100 Nm)

TORQUE
Sub Frame Mounting Fasteners (Rear):
148 ft-lbs (200 Nm)

TORQUE
Sub Frame Mounting Fasteners (Front):
33 ft-lbs (45 Nm)

TORQUE
Tie Rod End Nut:
30 ft-lbs (40 Nm) + 90°

TORQUE
Ball Joint Fasteners:
44 ft-lbs (60 Nm)

TORQUE
Wheel Hub Castle Nut:
180 ft-lbs (244 Nm)

8.26 9930583 R01 - 2020-2021 RZR PRO XP / XP 4 Service Manual
© Copyright Polaris Industries Inc.