Page 391 - Manual_Polaris_RZR_ProXP-20-21
P. 391
FINAL DRIVE
Compression Spring Operation: The torsion retainer AWD DIAGNOSIS
and compression springs t act as a return mechanism Symptom: AWD Will Not Engage
to help disengage the coupling of the output hubs and
ring gear by creating an “over-running” condition for the 1. Check the gearcase coil resistance. To test the coil
rollers upon disengagement. resistance, measure between the ground wire q
(GY) and power wire w (BN/WH). Measurement
should be within specification.
Front Gearcase Coil Resistance:
21.44 - 23.70 Ω
2. Turn on ignition and AWD switches and place gear
selector in High or Low. Check for minimum battery
voltage at Gray and Brown/White chassis wires that
power the coil. Should have a minimum of 11 VDC.
3. If electrical tests are within specification, remove
gearcase (see “Front Gearcase Removal” outlined in
this chapter) and inspect components.
8
9930583 R01 - 2020-2021 RZR PRO XP / XP 4 Service Manual 8.33
© Copyright Polaris Industries Inc.
