Page 394 - Manual_Polaris_RZR_ProXP-20-21

FINAL DRIVE

9. Remove four rear bolts y from front sub frame to INSTALLATION
main frame.
1. Reverse removal procedure for front gearcase
installation.
TORQUE
Front Gearcase Mounting Fasteners:
52 ft-lbs (70 Nm) + 270°

TORQUE
Control Arm Fasteners:
74 ft-lbs (100 Nm)

TORQUE
Sub Frame Mounting Fasteners (Rear):
148 ft-lbs (200 Nm)
10.Remove front sub frame.
11. Remove roll pin from front driveshaft. TORQUE
12.Remove upper control arm front bolt and pry A arm Sub Frame Mounting Fasteners (Front):
up to remove front diff mounting bolt u. 33 ft-lbs (45 Nm)

TORQUE
Tie Rod End Nut:
30 ft-lbs (40 Nm) + 90°

TORQUE
Ball Joint Fasteners:
44 ft-lbs (60 Nm)

TORQUE
Wheel Hub Castle Nut:
180 ft-lbs (244 Nm)
13.Remove gearcase fasteners i and remove gearcase
from vehicle. Discard fasteners. TORQUE
Front Caliper Mounting Bolts:
33 ft-lbs (45 Nm)

TORQUE
Front Bumper Mounting Fasteners:
30 ft-lbs (40 Nm)

TORQUE
Front Bumper Cover Mounting Fasteners:
7 ft-lbs (10 Nm)

8.36 9930583 R01 - 2020-2021 RZR PRO XP / XP 4 Service Manual
© Copyright Polaris Industries Inc.