Page 446 - Manual_Polaris_RZR_ProXP-20-21

STEERING / SUSPENSION

12.Remove IFP. 17.Use a strap wrench to remove the reservoir.
13.Dump out used shock oil.
14.Using a #10 Torx screwdriver remove screw from
LSC.

18.To remove pressed in reducers, use a tapered pin
punch and hammer. Drive pin punch into reducer with
a couple of medium taps with the hammer. Tap the
pin punch out and remove the reducer from the
15.Push in on LSC and remove retaining ring. tapered pin punch.

16.Use the IFP tool to remove LSC. 19.Remove both internal retaining rings.
IFP Tool: 20.Press out the spherical bearing with mandrel or
commercially available socket, press only on the bearing race.
also available from FOX 398-00-780
21.Ensure reservoir o-ring has been removed.
22.With the body of the shock placed in clamp block and
secured in vise, apply a sufficient amount of heat to
the body cap with a propane torch to remove the body
cap with the correct body cap socket.

9.42 9930583 R01 - 2020-2021 RZR PRO XP / XP 4 Service Manual
© Copyright Polaris Industries Inc.