Page 510 - Manual_Polaris_RZR_ProXP-20-21

BRAKE SYSTEM

REAR BRAKE DISC REPLACEMENT 8. Field test unit for proper braking action before putting
into service. Inspect for fluid leaks and firm brakes.
1. Remove rear brake caliper (see Brake Caliper / Pad Make sure brakes do not drag when pedal is
Removal page 10.28).
released. If the brakes drag, re-check assembly and
2. Remove wheel hub cotter pin r, castle nut e and installation.
washers w.
3. Remove the hub assembly from the vehicle and
remove the four studs q retaining the disc to the hub.

4. Clean the wheel hub mating surface and install new
disc on wheel hub.
5. Install new studs t.

6. Install wheel hub assembly, washers, and castle nut.
Torque castle nut to specification and install a new
cotter pin.
TORQUE
Rear Wheel Hub Castle Nut:
180 ft-lbs (244 Nm)

7. Install rear caliper (see Brake Caliper / Pad
Installation page ). Bleed the brake system. (See
BRAKE BLEEDING / FLUID CHANGE page 10.14.

10.32 9930583 R01 - 2020-2021 RZR PRO XP / XP 4 Service Manual
© Copyright Polaris Industries Inc.