Page 511 - Manual_Polaris_RZR_ProXP-20-21

BRAKE SYSTEM

REAR BRAKE CALIPER / PAD 3. Install lower radius rod bolt, washer and new nut.
INSTALLATION Torque to specification.
1. Install the rear caliper with new mounting bolts.
Torque mounting bolts q to specification.

TORQUE
Radius Rod to Bearing Carrier Bolt:
TORQUE 52 ft-lbs (70 Nm) + 90°
Rear Caliper Mounting Bolts:
33 ft-lbs (45 Nm) 4. Install the pad adjustment screw and turn until
stationary pad contacts disc, then back off 1/2 turn.
2. Install brake line banjo bolt w. Torque banjo bolt to 5. Follow bleeding procedure outlined earlier in this
specification. chapter.
6. Install wheel and torque wheel nuts to specification.

TORQUE
Wheel Nuts:
120 ft-lbs (163 Nm)

NOTICE
If new pads are installed, refer to Brake Burnishing
Procedure page 10.26.

10
NOTICE
The calipers have self-orienting features, brake lines do
not need to be oriented if installed correctly.

TORQUE
Banjo Bolts:
15 ft-lb (20 Nm)

9930583 R01 - 2020-2021 RZR PRO XP / XP 4 Service Manual 10.33
© Copyright Polaris Industries Inc.