Page 507 - Manual_Polaris_RZR_ProXP-20-21
P. 507
BRAKE SYSTEM
7. Push caliper mounting bracket inward and slip outer REAR CALIPER DISASSEMBLY /
brake pad past the edge to remove. INSPECTION
1. Remove brake pad adjustment set screw o.
2. Push upper pad retainer pin inward and slip brake
pads q past the edge and remove from the caliper.
3. Remove mount bracket w and dust boots y & u.
8. Remove the inner brake pad.
4. Using piston pliers, remove the piston t from the
caliper body i. Remove the square O-rings r and
e from the caliper body i.
5. Clean the caliper body, piston, and retaining bracket
a with brake cleaner or alcohol.
9. To remove the brake caliper: place a catch pan
under the brake caliper and remove the banjo bolt
retaining the brake line to the caliper.
10
NOTICE
Be sure to clean caliper body seal grooves.
9930583 R01 - 2020-2021 RZR PRO XP / XP 4 Service Manual 10.29
© Copyright Polaris Industries Inc.
