Page 159 - Manual Oficina XP 1000 14-16
P. 159
ENGINE / COOLING SYSTEM
13. Verify cam timing is correct. Flywheel TDC mark 14. If timing marks are not aligned, remove sprockets
should still be aligned (see Step 1) and cam sprocket and correct alignment.
markings should line up as shown.
15. Remove the Cylinder Holding & Camshaft Timing
Plate (PU-50563) from the end of the camshafts.
16. Rotate the engine using the flywheel and install the
remaining bolt in each camshaft sprocket. Torque the
sprocket bolts to specification.
TORQUE
Camshaft Sprocket Bolts: 3
14 ft-lb (19 Nm)
17. Rotate the engine using the flywheel and torque the
remaining sprocket bolts to specification.
18. Install the front camshaft carrier o and two outer
retaining bolts.
19. Install the fixed cam chain guide a and two retaining
bolts.
9926816 R06 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual 3.81
© Copyright Polaris Industries Inc.
