Page 332 - Manual Oficina XP 1000 14-16
P. 332
FINAL DRIVE
7. Torque the support bearing fasteners to REAR PROP SHAFT REMOVAL XP 4
specification.
1. Remove all seats.
TORQUE 2. Remove the front and rear center consoles (see
Support Bearing Fasteners: Chapter 10 – Rocker Panels, Rear Console and Floor
35 ft-lb (47 Nm) XP 4, page 10.24).
3. Remove the fasteners q from center w and rear skid
8. Align the front prop shaft paint mark with the front plates e.
gearcase input shaft mark so the pin holes align.
Install a new roll pin.
4. Remove center and rear skid plates.
5. Remove the fasteners r securing the support
bearing cover t to the frame.
6. Move the prop shaft support bearing assembly to the
drivers side to slide the rear prop shaft yoke y off the
transmission output shaft.
7.30 9926816 R06 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.
