Page 328 - Manual Oficina XP 1000 14-16

FINAL DRIVE

16.Install and tighten the small clamp e using the DRIVE SHAFT ASSEMBLY VIEW
appropriate clamp tool.

Axle Boot Clamp Tool: PU-48951
or
CV Boot Clamp Pliers: 8700226

17.Pull out on the drive shaft to center the joint in the
housing. Slide a straight O-ring pick or a small slotted
screw driver between the large end of the boot and
the joint housing and lift up to equalize the air
pressure in the boot.
18.Position the boot lip in its groove. Install and tighten
the large clamp r using the appropriate clamp tool.

7.26 9926816 R06 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.