Page 329 - Manual Oficina XP 1000 14-16

FINAL DRIVE

PROP SHAFT SERVICE

FRONT PROPSHAFT REMOVAL 3. Slide the front propshaft t off the rear propshaft y
and remove it from the vehicle.
1. Remove the center console.

4. Proceed to Front Prop Shaft Installation, page 7.28.
q Cap e Torx Screw
w Shifter r Push Rivet

2. Locate the prop shaft roll pin and use the Roll Pin
Removal Tool (PN 2872608) to remove the roll pin.
Discard roll pin. Push the front prop shaft rearward to
remove it from the front gearcase input shaft.

7

Roll Pin Removal Tool:
PN 2872608

NOTE
Right front wheel can be removed to gain better access
to the propshaft roll pin.

9926816 R06 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual 7.27
© Copyright Polaris Industries Inc.