Page 356 - Manual Oficina XP 1000 14-16

STEERING / SUSPENSION

LOWER STEERING SHAFT REMOVAL LOWER STEERING SHAFT INSTALLATION
1. Use the steering wheel to position the front wheels 1. Install the lower steering shaft onto the gear box and
so they point straight ahead. align the marks made during step 2 of the “Lower
Steering Shaft Removal (EPS Models)” procedure.
2. Locate the lower steering shaft through the left front
wheel well. Mark the lower steering shaft, gear box 2. Install the pinch bolt that retains the lower steering
stub shaft and gear box to aid installation. shaft to the steering rack assembly and torque to
specification.
TORQUE

Lower Steering Shaft Pinch Bolt:
42 ft-lb (57 Nm)

3. Install the power steering unit and reassemble the
vehicle (see Chapter 8 – Power Steering Unit
Installation, page 8.9).

3. Remove the power steering unit (see Chapter 8 –
Power Steering Unit Removal, page 8.6).
4. Remove the pinch bolt q retaining the lower steering
shaft w to the steering gear box assembly e.

5. Lift up on the shaft and remove it through the floor
panel.

8.8 9926816 R06 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.