Page 360 - Manual Oficina XP 1000 14-16

STEERING / SUSPENSION

11. Reinstall the steering shaft assembly in the vehicle.
Install the lower portion of the steering shaft onto the
steering gear box assembly (see Figure 5-16).
Torque the lower pinch bolt to specification.
TORQUE
Lower Steering Pinch Bolt:
42 ft-lb (57 Nm)

12. Install the two fasteners that retain the pivot tube
(see Figure 5-17). Torque fasteners to specification.

TORQUE
Pivot Tube Bolts:
8 ft-lb (11 Nm)

13. Install the fastener retaining the upper portion of the
steering wheel tilt shock to the pivot tube (see Figure
5-17). Torque fastener to specification.

TORQUE
Tilt Shock Bolt:
7 ft-lb (10 Nm)

14. Be sure the front wheels are facing straight forward.
Remove the steering wheel and align as needed.
Torque the steering wheel nut to specification. Apply
®
Loctite 271 ™
TORQUE

Steering Wheel Nut:
65 ft-lbs (88 Nm)

15. Wipe the pivot tube clean of any excess Loctite .
®
16. Install steering wheel cap and field test steering
operation.

8.12 9926816 R06 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.