Page 357 - Manual Oficina XP 1000 14-16

STEERING / SUSPENSION

POWER STEERING UNIT INSTALLATION 5. Torque the four mount bracket nuts y to
1. If the power steering unit q was removed from the specification.
mount bracket w, reinstall it prior to vehicle
installation. Torque the mounting bolts e to 20–24 ft.
lbs. (27–33 Nm)

TORQUE
Power Steering Unit Mount Bracket Nuts:
2. Install the power steering unit into the vehicle and 16 ft-lb (22 Nm)
align the skip-tooth spline on the power steering stub
shaft with the opening in the lower steering shaft. 6. Proceed to Upper Steering Shaft Installation, page
8.10 to complete the installation procedure.

8

3. Place the power steering mount bracket over the top
of the brake pedal mount studs and finger tighten the
four nuts.
4. Position the lower steering shaft on the power
steering unit stub shaft and install the pinch bolt.
Torque to specification.

TORQUE
Lower Steering Shaft to EPS Unit Pinch Bolt:
15 ft-lbs (20 Nm)

9926816 R06 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual 8.9
© Copyright Polaris Industries Inc.