Page 71 - Manual Oficina XP 1000 14-16

MAINTENANCE

FOX internal bypass shocks are position sensitive and become progressively stiffer as the suspension compresses. To
maintain the intended ride comfort, it is important that ride height is maintained to the factory setting.
Adding extra weight to the vehicle will decrease ride height and cause the shock to operate in the stiffer bypass zones.
To correctly compensate for added cargo or accessory weight, spring preload should be added to keep the shock in
the optimal zone and maintain ground clearance.
Refer to the following adjustment table to correctly compensate for weight added to the vehicle.
2
NOTE
These settings are only guidelines. The spring preload and shock clickers can be adjusted further to match personal
riding style and location of the weight on the vehicle.

FOX Internal Bypass Shock Adjustments

CARGO + SPRING
RIDERS FRONT SHOCK REAR SHOCK
ACCESSORIES ADJUSTMENT
Remove 0.2″ (5 mm)
Driver Only 0 preload, front and 16 clicks out 16 clicks out
rear

Driver +1 0 Factory default 12 clicks out 12 clicks out
Add 0.2″ (5 mm)
Driver +1 100 lbs (45 kg) preload, front and 10 clicks out 10 clicks out
rear
Add 0.4″ (10 mm)
Driver +1 200 lbs (91 kg) preload, front and 8 clicks out 8 clicks out
rear
Add 0.6″ (15 mm)
Driver +1 300 lbs (136 kg) preload, front and 6 clicks out 6 clicks out
rear

* shaded cells are factory default settings

9926816 R06 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual 2.37
© Copyright Polaris Industries Inc.