Page 75 - Manual Oficina XP 1000 14-16

MAINTENANCE

BATTERY INSTALLATION ENGINE / CHASSIS ELECTRICAL GROUND
Inspect the ground cable connections. Remove ground
CAUTION terminals and clean if necessary.

Using a new battery that has not been fully charged can 1. Located below the start solenoid q, the chassis
damage the battery, result in a shorter life and hinder ground connection w can be accessed through the
vehicle performance.
left rear wheel area. 2
1. Ensure the battery is fully charged.
2. Place the battery in the battery holder and secure
with hold-down strap.
3. Coat the terminals with dielectric grease or
petroleum jelly.
4. Connect and tighten the red (positive) cable(s) first.
5. Connect and tighten the black (negative) cable (s)
last. Torque terminal fasteners to specification.

2. Inspect the chassis ground terminals. Be sure the
grounds are clean and tight.

TORQUE
Battery Terminal Fasteners:
60 in-lbs (7 Nm)

6. Verify that cables are properly routed and reinstall
the driver’s seat.

9926816 R06 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual 2.41
© Copyright Polaris Industries Inc.