Page 297 - Manual Oficina Polaris RZR XP 1000 17-18

TRANSMISSION

6. The gap between the shifter guide and the gated 8. Install the shifter boot t, spacer r, shift knob e,
plate should be the same on both sides. retaining screw w and shift knob cover q.
IMPORTANT
The shift lever must be in Reverse when performing this
inspection.

GATED SHIFTER ADJUSTMENT (GOLD
METALLIC LE)

1. Place the gear selector in REVERSE.
7. If the gaps are not equal, move the bracket until the 2. Remove the shift knob cover q, retaining screw w,
gaps are equal and tighten the fasteners to shift knob e and spacer r from the shifter shaft. 6
specification.

3. Remove the shifter boot t from the center console.
TORQUE
Gated Shifter Bracket Fasteners:
14 ft-lb (19 Nm)

9928492 R06 - 2017-2018 RZR XP 1000 / XP4 1000 Service Manual 6.5
© Copyright Polaris Industries Inc.