Page 301 - Manual Oficina Polaris RZR XP 1000 17-18

TRANSMISSION

13. Remove the four bolts (w attaching the upper and 16. Place a spacer or support between the vehicle frame
lower radius rods to the bearing carriers (left and and engine to hold the engine up in position.
right side). Discard nuts and replace with new upon
assembly. Allow the radius rods swing downward.

17. Remove vent hose from transmission.
14. Remove both lower shock bolts (left and right side) 18. Remove the gear position switch connector y,
while supporting the trailing arms from underneath. speed sensor connector t, crankshaft position
Lift training arms up and swing trailing arms outward sensor connector r, shift bracket bolts and shift
to remove the drive shafts from the transmission.
bracket u, shift cable clevis pin and washer i from
15. Maneuver the drive shafts out of the vehicle frame. the transmission. 6
Reinstall the lower shock bolts e to hold the trailing
arms up during the rest of the removal procedure.

19. Remove the wire ties retaining harness to
transmission and mounts.

9928492 R06 - 2017-2018 RZR XP 1000 / XP4 1000 Service Manual 6.9
© Copyright Polaris Industries Inc.