Page 298 - Manual Oficina Polaris RZR XP 1000 17-18

TRANSMISSION

4. The gap between the shifter guide y and the gated 5. If the gaps are not equal, loosen the four bracket bolts
plate u should be the same on both sides. i. Move the bracket until the gaps are equal and
tighten the fasteners to specification.

TORQUE
Gated Shifter Bracket Fasteners:
14 ft-lb (19 Nm)

6. Install the shifter boot, spacer, shift knob, retaining
screw and shift knob cover.

SHIFT CABLE INSPECTION
Shift cable adjustment may be necessary if symptoms
include:

• No gear position or AWD display on instrument cluster
NOTE • Ratcheting noise on deceleration
The center console is not shown for visual purposes. • Inability to engage into a gear
This work may be performed with the center console
installed. • Excessive gear lash (noise)
• Gear selector moving out of desired range

Inspect shift cable, clevis pins, and pivot bushings and
replace if worn or damaged.

SHIFT CABLE ADJUSTMENT
1. Locate the shift cable attached to the transmission
case in the right rear wheel well area.

6.6 9928492 R06 - 2017-2018 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.