Page 317 - Manual Oficina Polaris RZR XP 1000 17-18

TRANSMISSION

14. Press the new bushing into the side gear until it 5. Install screws hand tight. Place assembly in soft jaw
bottoms out. vise and torque to specification.

NOTICE
PLANETARY DIFFERENTIAL ASSEMBLY
(TURF MODE MODELS ONLY) The are two possible grades for the differential cover
screws. The grade can be located on the head of the
1. Thoroughly clean the differential components.
fastener. The two possible fasteners are grade 8.8 and
2. Assemble the side gears and place them onto the grade 10.9. Torque the screws according to their 6
ring gear along with the six planet gears. corresponding grade.

3. Align and install the differential cover using the
previously made scribe marks. TORQUE
4. Apply Loctite® 2760™ to cover screws. Differential Cover Screws (8.8 Fastener):
22 ft-lb (30 Nm)

TORQUE
Differential Cover Screws (10.9 Fastener):28 ft-lbs (38
Nm)

9928492 R06 - 2017-2018 RZR XP 1000 / XP4 1000 Service Manual 6.25
© Copyright Polaris Industries Inc.