Page 319 - Manual Oficina Polaris RZR XP 1000 17-18

TRANSMISSION

TRANSMISSION ASSEMBLY / SNORKEL 4. Apply a small amount of white lithium grease or Anti-
GEAR BACKLASH PROCEDURE Seize on the threads i of the snorkel tube.

1. Reassemble the snorkel tube and snorkel shaft
assembly by reversing the disassembly procedure
(see “Snorkel Shaft Removal / Disassembly”).

5. Install the snorkel shaft into the gearcase. Using the
Snorkel Tool, tighten the snorkel tube until it is lightly
seated in the transmission housing.

6

REF DESCRIPTION

q Seal
w Snap Ring
e Washer

r Bearing
Snorkel Tool
t Snorkel Tube PA-50231
y Snorkel Shaft

u 13T Gear

2. After the 13T gear and bearing are pressed onto the
snorkel shaft (flush to the shoulder), install the
washer and new retaining ring.
3. Press the gear back towards the retaining ring. Avoid
excessive force so the retaining ring is not damaged
or pre-stressed significantly.
NOTICE
Failure to press the gear back against the washer and
retaining ring will lead to a gear backlash change after
vehicle is placed into service.

9928492 R06 - 2017-2018 RZR XP 1000 / XP4 1000 Service Manual 6.27
© Copyright Polaris Industries Inc.