Page 324 - Manual Oficina Polaris RZR XP 1000 17-18

TRANSMISSION

29.Install the detent pawl onto the shift shaft and 34.Install the transmission drain plug and torque to
carefully install the compression spring. specification.
TORQUE
Fill / Drain Plug:
14 ft-lbs (19 Nm)

35.Install the bellcrank onto the shift shaft. Note the key
splined on the bellcrank and shift shaft. Install the nut
and torque to specification.

TORQUE
Bell Crank Nut:
18 ft-lb (24 Nm)

36.Refer to Transmission Installationpage to complete
30.Install a new O-ring on each shift shaft 3^. Apply a the repair.
small amount of white lithium grease on the O-rings,
shift shafts and component contact surfaces prior to
installing the sector cover.

31.Clean the transmission and gear sector cover mating
surfaces thoroughly.

32.Apply Crankcase Sealant (3-Bond) onto the cover
and transmission case mating surface.
Crankcase 3 Bond Sealant
PN 2871557

33.Install the sector cover and align the transmission
case dowel with the alignment hole. Install and torque
the bolts to specification.

TORQUE
Sector Gear Cover Bolts:
12 ft-lb (16 Nm)

6.32 9928492 R06 - 2017-2018 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.