Page 372 - Manual Oficina Polaris RZR XP 1000 17-18

STEERING / SUSPENSION

STEERING WHEEL REMOVAL POWER STEERING UNIT REMOVAL
1. Remove the upper steering shaft, pivot tube and 1. Remove the upper steering shaft, pivot tube and
steering wheel as an assembly before attempting to steering wheel from the vehicle as an assembly.
remove the steering wheel. Refer to Upper Steering Refer to Upper Steering Shaft Removalpage 8.5.
Shaft Removalpage 8.5.
CAUTION
CAUTION
Striking the steering wheel or steering shaft while
Striking the steering wheel or steering shaft while installed in the vehicle can permanently damage the
installed in the vehicle can permanently damage the EPS unit and cause a power steering fault.
EPS unit and cause a Power Steering Fault.
2. Disconnect the two electrical harnesses q from the
2. Remove the steering wheel cap. power steering unit .

3. Loosen the nut and back it half way off the steering 3. Remove the pinch bolt w retaining the lower steering
shaft. shaft to the power steering unit .
4. Place the assembly in a vise.
5. Using a large bronze drift and hammer, strike the
steering shaft nut to pop the steering wheel off the
shaft taper.

6. Once the steering wheel pops loose, completely
remove the nut and lift the steering wheel off the
shaft.

8.6 9928492 R06 - 2017-2018 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.