Page 436 - Manual Oficina Polaris RZR XP 1000 17-18

BRAKE SYSTEM

DISC REPLACEMENT 6. Install wheel hub assembly, washers, and castle nut.
1. Remove rear brake caliper (see Chapter 9 – Caliper Torque castle nut to specification and install a new
Removalpage 9.28). cotter pin.
2. Remove wheel hub cotter pin r, castle nut e and TORQUE
washers w.
Rear Wheel Hub Castle Nut:
3. Remove the hub assembly from the vehicle and 110 ft-lbs (149 Nm)
remove the four bolts q retaining the disc to the hub.
7. Install rear caliper (see Chapter 9 – REAR CALIPER
SERVICEpage ). Bleed the brake system. (See
Chapter 9 – BRAKE BLEEDING / FLUID
CHANGEpage 9.12.

8. Field test unit for proper braking action before putting
into service. Inspect for fluid leaks and firm brakes.
Make sure brakes do not drag when pedal is
released. If the brakes drag, re-check assembly and
installation.

4. Clean the wheel hub mating surface and install new
disc on wheel hub.
5. Install new bolts t and torque to specification.

CAUTION
Always use new brake disc mounting bolts. The bolts
have a pre-applied locking agent which is destroyed
upon removal.

TORQUE
Brake Disc Mounting Bolts:
30 ft-lb (41 Nm)

9.32 9928492 R06 - 2017-2018 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.