Page 260 - Manual Oficina Polaris Sportsman 570 2014 a 2016

ENGINE / COOLING SYSTEM

ENGINE BREAK-IN PERIOD ENGINE LUBRICATION SPECIFICATIONS
The break-in period consists of the first 25 hours of
operation, or the time it takes to use 15 gallons (57 liters) FLUID CAPACITY
of fuel. Careful treatment of a new engine and drive Oil Capacity:
components will result in more efficient performance and Approx. 2 Quarts (1.9 L)
longer life for these components.
Oil Filter Wrench:
CAUTION
PU-50105 or 2.5” (64 mm)
Use only Polaris PS-4
Synthetic Engine Oil. Oil Type:
Polaris PS-4
Never substitute or mix oil brands. Synthetic Engine Oil

Serious engine damage can result. Oil Pressure
Minimum Specification:
Do not operate at full throttle or high speeds for (using Polaris PS-4 at operating temperature)
extended periods during the first three hours of use. 10 PSI @ 1200 RPM(Minimum)
Excessive heat can build up and cause damage to
close fitted engine parts.

1. Fill fuel tank with unleaded fuel which has a minimum
pump octane number of 87 = (R+ M)/2.
2. Refer to Chapter 2, “Engine Oil Level”. Check oil
level indicated on oil tank dipstick. Add oil if
necessary.

3. Drive slowly at first to gradually bring engine up to
operating temperature.
4. Vary throttle positions. Do not operate at sustained
idle or sustained high speed.
5. Perform regular checks on fluid levels, controls and
all important bolt torques.
6. Change oil and oil filter after break-in period at 25
hours.

3.138 9926803 R06 - 2014-2016 Sportsman 325 / ETX / 450 HO / 570 Service Manual
© Copyright Polaris Industries Inc.