Page 255 - Manual Oficina Polaris Sportsman 570 2014 a 2016

ENGINE / COOLING SYSTEM

31. Install the engine stand adapter onto the engine PTO ENGINE INSTALLATION
side mounting ears as shown below.
Use the following procedure to reinstall the engine
assembly.
Engine Stand Adapter: PU-50824-A
1. Attach engine with suitable lifting straps to an
overhead or portable engine hoist.
2. Remove the engine stand adapter plate.
3. Use the overhead or portable engine hoist and
suitable engine straps to lower the engine onto the
left footwell support.
3
NOTE
Have an assistant help guide the engine in and out of
the vehicle while using an engine hoist to prevent
personal injury or damage to vehicle components.

4. Remove the lifting straps and overhead or portable
engine hoist and remove the support previously
installed under the transmission case during the
engine removal process.
5. Have an assistant help lift and rotate the engine into
32. Select the proper engine stand sleeve adapter and the frame.
install it onto the engine stand adapter.
6. Install the rear engine mount fasteners .
Engine Stand Sleeve Adapter (2” Bore Stand): PU-
50625 IMPORTANT
Engine Stand Sleeve Adapter (2.375” Bore Stand): Do not tighten fasteners at this time.
PW-47054

33. Place engine onto the engine stand for service.
Engine Stand: PU-50624-A

NOTE
Image for reference only.

9926803 R06 - 2014-2016 Sportsman 325 / ETX / 450 HO / 570 Service Manual 3.133
© Copyright Polaris Industries Inc.