Page 256 - Manual Oficina Polaris Sportsman 570 2014 a 2016

ENGINE / COOLING SYSTEM

7. Install the front engine mounts and fasteners. 10. Torque the fasteners that attach the front engine
mounts to the engine to specification.
IMPORTANT
TORQUE
Do not tighten fasteners at this time.
Engine Mount to Engine:
37 ft-lbs (50 Nm)

2014

8. Torque the rear engine mount fasteners to
specification.

TORQUE
Engine Mount, Rear
23 ft-lbs (31 Nm) 2015

9. Install the Clutch Center Distance Tool onto the
crankshaft and transmission input shaft to properly
position the clutch center distance. (See CLUTCH
ALIGNMENT, page 5.19)

Clutch Center Distance Tool: 2871710

NOTE
Verify clutch center to center alignment at this time.
If necessary shim the rear engine to frame mount as
required. 11. Torque the fasteners that attach the front engine
mounts isolators to specification.

TORQUE
Engine Mount Isolators, Front:
23 ft-lbs (31 Nm)

12. Remove the clutch center-to-center tool.
NOTE
The clutch center to center alignment tool should not
have pressure on it at this time.
If pressure is observed, adjust as necessary.

13. Install front prop shaft.(See PROP SHAFT - FRONT
OR REAR, page 7.44)

3.134 9926803 R06 - 2014-2016 Sportsman 325 / ETX / 450 HO / 570 Service Manual
© Copyright Polaris Industries Inc.