Page 431 - Manual Oficina Polaris Sportsman 570 2014 a 2016

PVT SYSTEM

5. Turn clutch sheave counterclockwise until bushing is CLUTCH ASSEMBLY
seated. 1. Install spacer washers q and moveable sheave w
on the splined shaft of the fixed sheavee. Important:
At least one spacer washer must be installed.
Teflon™ bushings are self-lubricating. Do not apply
oil or grease to the bushings.

6. Remove nut from puller rod and set aside.
7. Remove installation tool and clutch sheave from 5
puller.

8. Repeat installation procedure for other moveable
bushing.
9. Install new ramp buttons into the sheave. Apply
thread locking agent to the fasteners. Install
fasteners and tighten securely.

9926803 R06 - 2014-2016 Sportsman 325 / ETX / 450 HO / 570 Service Manual 5.45
© Copyright Polaris Industries Inc.