Page 428 - Manual Oficina Polaris Sportsman 570 2014 a 2016
P. 428
PVT SYSTEM
6. Remove the spring t. 9. Remove moveable sheave r and note the number
of spacer washers y. One spacer must remain
between the sheaves when adjusting belt deflection.
7. Check alignment of tabs on spring. Replace the
spring if tabs are misaligned or the spring coils are
distorted. 10. Inspect the Teflon™ coating on the moveable sheave
bushingsio.
8. Inspect ramp buttons in the moveable sheave and
replace if worn.
Moveable Sheave Bushing Inspection:Replace the
bushing if more brass than Teflon™ is visible on the
NOTE
bushing. Refer to the “Bushing Service” section.
The ramp buttons are secured by Torx™ screws (T20).
11. Inspect driven clutch faces for wear or damage.
12. Clean and inspect splines on helix and transmission
input shaft.
13. Lube splines with a light film of grease. Do not
lubricate the bushings!
5.42 9926803 R06 - 2014-2016 Sportsman 325 / ETX / 450 HO / 570 Service Manual
© Copyright Polaris Industries Inc.
