Page 429 - Manual Oficina Polaris Sportsman 570 2014 a 2016

PVT SYSTEM

BUSHING SERVICE 4. Using a heat gun, apply heat directly on bushing until
Bushings are installed at the factory using Loctite™. In tiny smoke tailings appear. This loosens the thread
order to remove the bushing it will be necessary to apply locking agent, allowing for fastener removal.
heat. A press can be used to remove and install some of
the bushings. Be sure to support the sheave or cover as CAUTION
close as possible to the bushing bore when using a Clutch components will be hot! In order to avoid serious
press. burns, wear heat resistant insulated gloves for the rest

1. Install Main Puller Adapter (#8) (PN 5020632) onto of the removal process.
the Piston Pin Puller (PN 2870386).

5

2. Insert Adapter Reducer (#9) (PN 5010279) onto the 5. Working from the top, install Driven Clutch Bushing
puller, sliding it inside the main adapter. Removal Tool (#5) (PN 5020631) into the center of
clutch sheave with smaller diameter toward bushing
3. Remove ramp buttons from moveable sheave.
to be removed. See illustration.

6. Install sheave onto puller.
7. Install nut onto puller rod and tighten by hand. Turn
puller barrel for further tension if needed.

9926803 R06 - 2014-2016 Sportsman 325 / ETX / 450 HO / 570 Service Manual 5.43
© Copyright Polaris Industries Inc.