Page 489 - Manual Oficina Polaris Sportsman 570 2014 a 2016

FINAL DRIVE

8. Install the ring gear and roll cage assembly into the 11. Check the action of the torsion spring by rotating in
gearcase housing. both directions to ensure the spring and retainer are
installed properly.
9. Install the torsion spring by wrapping each leg of the
spring around the dowel pin on the ring gear.

12. Be sure the armature plate tabs are fully engaged
into the roll cage assembly and are resting on the
10. Align the spring retainer dowel pin with the ring gear cut-grooves of the ring gear.
dowel pin and install the retainer on top of the torsion
spring.

7

NOTE
Verify armature plate tabs are in the slots on the roll
cage and are resting in the ring gear grooves.

9926803 R06 - 2014-2016 Sportsman 325 / ETX / 450 HO / 570 Service Manual 7.13
© Copyright Polaris Industries Inc.