Page 573 - Manual Oficina Polaris Sportsman 570 2014 a 2016

BRAKE SYSTEM

FRONT BRAKES

PAD REMOVAL 5. Push caliper piston into caliper bore slowly using a
C-clamp or locking pliers with pads installed.
1. Elevate and support the of the ATV.
CAUTION
Use care when supporting vehicle so that it does not tip
or fall. Severe injury may occur.

2. Remove the wheel.
3. Loosen pad adjuster screw 2-3 turns.

NOTE

Brake fluid will be forced through compensating port
into master cylinder fluid reservoir when piston is
pushed back into caliper. Remove excess fluid from
reservoir as required.

6. Push mounting bracket inward and slip outer brake
pad past edge. Remove inner pad.
4. Remove caliper mounting fasteners and caliper from
mounting bracket.

9

9926803 R06 - 2014-2016 Sportsman 325 / ETX / 450 HO / 570 Service Manual 9.15
© Copyright Polaris Industries Inc.