Page 585 - Manual Oficina Polaris Sportsman 570 2014 a 2016

BRAKE SYSTEM

8. Inspect caliper piston bore for scratches, severe 3. Install brake pads in caliper body with friction
corrosion, or galling and replace if necessary. material facing each other. Install the slide pins and
the slide pin retaining rings. Torque the slide pins to
specification.
NOTE
The slide pins should be torqued when installed on
caliper mount.

9. Inspect surface of caliper piston for nicks, scratches,
or damage and replace if necessary.
ASSEMBLY
1. Install new O-rings in the slide bolt bushing holes. Be
sure O-ring and seal grooves are thoroughly cleaned
of all residue, or piston may bind in bore. Apply brake
fluid to piston seals and install carefully with a TORQUE
twisting motion to ease assembly until fully seated.
Sportsman Caliper Slide Pins:
35 ft-lbs (47 Nm)

4. Install caliper and torque mounting bolts to
specification.

9

2. Carefully assemble caliper body, making sure O-
rings are properly positioned in groove. Tighten the
caliper anvil bolts and then torque the anvil bolts
evenly to specification.
TORQUE
TORQUE
Caliper Anvil Bolt:
16-18 ft-lbs (22-24 Nm) Caliper Mounting Bolts:
37 ft-lbs (50 Nm)

9926803 R06 - 2014-2016 Sportsman 325 / ETX / 450 HO / 570 Service Manual 9.27
© Copyright Polaris Industries Inc.