Page 581 - Manual Oficina Polaris Sportsman 570 2014 a 2016

BRAKE SYSTEM

7. Remove the inner brake pad. TOURING PAD INSTALLATION
1. Lubricate mounting bracket pins with a light film of
disc brake caliper lube, and install rubber dust boots.

8. Clean the caliper with brake cleaner or alcohol.
9. Measure the thickness of the pad material. Replace
pads if worn beyond the service limit.
2. Compress mounting bracket and make sure dust
BRAKE PAD INSPECTION boots are fully seated. Install pads with friction
material facing each other.
1. Check the brake pads for wear, damage, or
looseness. WARNING
2. Inspect the brake pad wear surface for excessive If brake pads are contaminated with grease, oil, or
wear.
liquid soaked do not use the pads.

Use only new clean pads.

3. Install caliper and torque the mounting bolts to
specification.

9

MEASUREMENT
Brake Pad
.030″ (0.762 mm)

3. If any one pad is less than the service limit then all
pads should be replaced.

TORQUE

Caliper Mounting Bolts:
37 ft-lbs (50 Nm)

9926803 R06 - 2014-2016 Sportsman 325 / ETX / 450 HO / 570 Service Manual 9.23
© Copyright Polaris Industries Inc.