Page 130 - Manual Oficina Polaris RS1 2018 e 2019
P. 130
ENGINE / COOLING SYSTEM
33.Install muffler onto isolator mounts, and install two 35.Connect the oxygen sensor electrical connector and
muffler springs g. reinstall hinge clip retained to the frame.
36.Install muffler heat shield and install two fasteners j
and washers retaining the heat shield. Torque
fasteners to specification.
34.Install two fasteners h retaining muffler to the
exhaust pipe. Torque fasteners to specification.
TORQUE
Muffler Heat Shield Fasteners:
8 ft-lbs (11 Nm)
37.Install muffler cover and four screws k. Torque
screws to specification.
TORQUE
Muffler to Exhaust Pipe Fasteners:
21 ft-lbs (28 Nm)
3.44 9928689 - 2018 RZR RS1 Service Manual
© Copyright Polaris Industries Inc.
