Page 126 - Manual Oficina Polaris RS1 2018 e 2019

ENGINE / COOLING SYSTEM

13.Reinstall ground stud with two wires. One from the TORQUE
starter and one from the main harness.
PVT Inner Cover Fasteners:
STEP 1: Torque to 37 ft-lbs (50 Nm).
STEP 2: Install through bolts by adjusting the
transmission accordingly.
STEP 3: If previously removed, loosely install bolts
by hand.
STEP 4: Torque to 37 ft-lbs (50 Nm).
STEP 5: Torque to 50 ft-lbs (68 Nm).
STEP 6: If previously removed, torque to 37 ft-lbs
(50 Nm)
l

NOTE
To aid in hole alignment, loosen transmission mount
fasteners t.
14.Reconnect engine breather e to air intake tube.

15.Install inner PVTcover
16.Torque engine mount fasteners y to specification.

TORQUE
Engine mount fasteners:
40 ft-lbs (54 Nm)

3.40 9928689 - 2018 RZR RS1 Service Manual
© Copyright Polaris Industries Inc.