Page 128 - Manual Oficina Polaris RS1 2018 e 2019
P. 128
ENGINE / COOLING SYSTEM
21.Install driven clutch with retaining washer, snap-ring, 23.Install PVT intake duct. Torque worm clamps a to
and bolt. Torque bolt to specification. specification.
TORQUE TORQUE
Driven Clutch Retaining Bolt: PVT Intake Duct Clamps:
43 ft-lb (58 Nm) 35 in-lbs (4 Nm)
22.Install outer clutch cover. Torque nine clutch cover 24.Install both rear shocks s to the frame. Torque
bolts o to specification. fasteners to specification.
TORQUE TORQUE
Outer Clutch Cover Screws: Rear Shock Mounting Fasteners:
35 in-lb (3 Nm) 70 ft-lbs (95 Nm)
25.Install rear shock reservoirs, and worm clamps.
Torque worm clamps to specification. Reinstall cable
ties retaining reservoir lines to either side of the
radiator.
TORQUE
Shock Reservoir Mounting Clamps:
35 in-lb (4 Nm)
26.Install CV shafts into either side of the transmission
and into bearing carriers.
3.42 9928689 - 2018 RZR RS1 Service Manual
© Copyright Polaris Industries Inc.
