Page 170 - Manual Oficina Polaris RS1 2018 e 2019

ENGINE / COOLING SYSTEM

10.Torque lower crankcase bolts in sequence to 13.Torque the upper crankcase bolts in sequence to
specification. Repeat sequence to verify final torque. specification (start with #12). Repeat the sequence to
verify final torque.

TORQUE
TORQUE
Lower Crankcase Bolts:
M10 Bolts: Upper Crankcase Bolts:
M8 Bolts: 26 ft-lb (35 Nm)
Step 1: 9 ft-lb (12 Nm)
Step 2: 21 ft-lb (28 Nm) M6 Bolts: 7 ft-lbs (10 Nm)
Step 3: Tighten add’n 90°
14.Rotate the engine so the cylinder is facing down.
15.Install a new seal on the oil pump.
M8 Bolts:
16.Lift the oil pump drive chain and install the oil pump.
26 ft-lb (35 Nm)

M6 Bolts:
7 ft-lbs (10 Nm)

11. Rotate the engine so the cylinder is facing up.
12.Install the eleven M6 o and two M8 i upper
crankcase bolts. Tighten all bolts lightly by hand.

3.84 9928689 - 2018 RZR RS1 Service Manual
© Copyright Polaris Industries Inc.