Page 280 - Manual Oficina Polaris RS1 2018 e 2019

TRANSMISSION

4. Adjust the shift cable so there is the about the same
amount of cable travel when shifting slightly past
HIGH gear than when shifting to PARK.
5. Thread the upper or lower jam nut as required to
obtain proper cable adjustment.
NOTE

This procedure may require a few attempts to obtain
the proper adjustment.

6. Once the proper adjustment is obtained, place the
shift cable and upper jam nut into the mount. Tighten
the lower jam nut against the mount.
TORQUE
Shift Cable Jam Nuts:
16 ft-lb (22 Nm)

7. Start engine and shift through all gears to ensure the
shift cable is properly adjusted. If transmission still
ratchets after cable adjustment, the transmission will
require service.

6.4 9928689 - 2018 RZR RS1 Service Manual
© Copyright Polaris Industries Inc.