Page 282 - Manual Oficina Polaris RS1 2018 e 2019
P. 282
TRANSMISSION
7. Disconnect the oxygen sensor electrical connector 10.Remove two 15mm fasteners e securing muffler to
and hinge clip retained to the frame. exhaust pipe.
8. Remove four torx screws q retaining muffler cover.
NOTE
The nuts on the exhaust side of the clamp are weld
nuts.
11. Remove two muffler springs r.
9. Remove two fasteners and washers retaining w the
muffler heat shield.
6.6 9928689 - 2018 RZR RS1 Service Manual
© Copyright Polaris Industries Inc.
